Install Date - Konica Minolta bizhub C353 Service Manual

10. Service Mode
10.8.7

Install Date

Functions • To register the date the main body was installed.
Use • Upon setup.
Setting/ 1. Call the Service Mode on the screen.
Procedure 2. Select the key as follows.
[System 1] → [Install Date].
3. Enter the date (Year 4 digit → Month 2 digit → date 2 digit) from the 10-key pad.
4. Touch [Entry] to set the date of installation.
10.8.8 Initialization
A. Data Clear
Functions • To initialize the setting data.
Use • To clears the setting data.
For details on items to be cleared, see "Contents to be cleared by reset function."
See P.450
NOTE
• When removing or installing the hard disk after registering the data below, be
sure to clear the data.
Referring data: One-touch registration, user authentication/account track.
Setting/ 1. Call the Service Mode to the screen.
Procedure 2. Select the key as follows.
[System 1] → [Initialization] → [Data clear].
3. Press the Start key.
4. When [OK] is displayed, turn off the main power switch and turn it on again more
than 10 seconds after.
B. System Error Clear
Functions • To reset the trouble data.
Use • Use to clear the [Jam], [Trouble], [Error] displays, and other improper displays.
For details on items to be cleared, see "Contents to be cleared by reset function."
See P.450
Setting/ 1. Call the Service Mode to the screen.
Procedure 2. Select the key as follows.
[System 1] → [Initialization] → [System Error Clear].
3. Press the Start key.
4. When [OK] is displayed, turn off the main power switch and turn it on again more
than 10 seconds after.
390
Field Service Ver. 3.0 Jan. 2008