12. Billing Setting
7. Select [Yes] on the loadable device driver installation screen.
8. Press the [START] to start installing the driver.
(At this time, the Start key starts blinking red.)
9. Check that the control panel shows the message indicating that the data has been
installed correctly ([Downloading Completed]). Check also the check sum value
([Check Sum ####]) shown on the control panel. (The Start key lights blue.)
10. Turn OFF the main power switch.
11. Remove the compact flash card from the slot.
12. Turn ON the main power switch, and close the front door.
444
Field Service Ver. 3.0 Jan. 2008
A00JF3C543DA