Konica Minolta bizhub C353 Service Manual page 503

14. Mechanical adjustment
14.2.2 Centering adjustment of the tray 1, 2
This adjustment must be made in the following case:
• When an image printed on a copy is displaced from the correct position with the
use of the tray1/2.
1. Make a test print and check the amount of misalignment.
2. Pull out the tray where this adjustment is made.
[1]
[1]
458
A00JF3C002DA
[1]
A00JF3C003DA
[1]
[2]
A00JF3C004DA
Field Service Ver. 3.0 Jan. 2008
3. Stretch the paper guide [1] to the
maximum size position.
4. Loosen two screws [1].
5. Move the paper guide [1] complete
according to the amount of the mis-
centering you checked in step 1 and
adjust the center position of it.
6. Tighten two screws [2].
7. Make another test print and check
the amount of misalignment.