Konica Minolta bizhub C353 Service Manual page 325

8. Utility Mode
(5) Print Settings: Workgroup
Functions • To set the workgroup.
Use • To set the workgroup.
Setting/ 1. Touch [Workgroup].
Procedure 2. Enter the workgroup (up to 15 characters) on the on-screen keyboard, and touch
[OK].
(6) WINS Settings
Functions • To set whether or not to enable the WINS setting.
Use • To use the WINS (Windows Internet Name Service) setting is necessary.
• By using the WINS, the traffic by broadcast can be reduced, and the communication
becomes available with the network where broadcast does not reach.
Setting/ • The default setting is ON.
Procedure
(7) WINS Settings: Automatic Retrieval Settings
Functions • To set whether or not to enable the auto obtaining of the WINS server address.
Use • To acquire the WINS server address automatically.
• To obtain the WINS server address from DHCP server. If there are more than on
address settings, up to two can be acquired.
Setting/ • The default setting is Enable.
Procedure
(8) WINS Settings: WINS Server Address 1, 2
Functions • To set the WINS server address.
Use • To use when manually entering the WINS server address.
• The primary address and the secondary address can be set.
(The primary address has the priority during operation.)
Setting/ 1. Touch [1] or [2].
Procedure 2. Enter the WINS server address.
(9) WINS Settings: Node Type Setting
Functions • To set a node type.
Use • To change the current node type.
Setting/ • The default setting is H Node.
Procedure
(10) Direct Hosting Setting
Functions • To set whether or not to enable the direct hosting setting.
Use • To use the direct hosting setting is necessary.
Setting/ • The default setting is ON.
Procedure
280
"ON"
"Enable"
B Node P Node
"ON"
Field Service Ver. 3.0 Jan. 2008
OFF
No Limit
N Node "H Node"
OFF