Konica Minolta bizhub C353 Service Manual page 220

Field Service Ver. 3.0 Jan. 2008
[2] [1]
[3]
[3]
[1]
[2] [1]
[3]
A00JF2C442DA
[2]
[1]
A00JF2C443DA
[2]
[3]
A00JF2C444DA
9. Put the front/rear pulleys [1] into the
shaft [2], and fix them with one screw
each [3].
NOTE
• Set the pulley at the direction as
shown in the illustration.
• Fix the pulley at the position as
shown in the illustration.
• Apply the screw lock on the screw.
10. Set the shaft [1] and install the bear-
ing [2] and the C-ring [3].
11. Install the bearing [1].
12. Install the gear [3] with the screw [2].
NOTE
• Apply the screw lock on the screw.
6. Other
175