Energy Saver Mode; Entering The Energy Saver Mode; What Happens In Energy Saver Mode; Return To Stand-By Mode - Gestetner B003 Service Manual

ENERGY SAVER MODES

6.16.2 ENERGY SAVER MODE

Entering the energy saver mode

The machine enters energy saver mode when one of the following is done.
• The Clear Mode/Energy Saver Key is held down for a second.
• The energy saver timer runs out after the end of a job.

What happens in energy saver mode

When the machine enters energy saver mode, the fusing lamp drops to a certain
temperature, and the operation panel indicators are turned off except for the
Energy Saver LED and the Power LED.
If the CPU receives the image print out command from an application (e. g. to print
incoming fax data or to print data from a PC), the fusing temperature rises to print
the data.

Return to stand-by mode

If one of the following is done, the machine returns to stand-by mode:
• The Clear Mode/Energy Saver Mode key is pressed
• Any key on the operation panel or touch panel screen is pressed
• An original is placed in the ADF
• The ADF is lifted
• A sheet of paper is placed in the by-pass feed table
The recovery time from energy saver mode is about 3 s.
Operation
Mode
Switch
Energy
On
Saver
B003/B004/B06/B007
Energy
Fusing Temp.
Saver LED
B003 & B006: 130
On
B004 & B007: 150
6-82
+24V System +5V
o
C
On
o
C
On
SM