Rom History - Gestetner B003 Service Manual

Rev. 01/2000
⇒

4.7 ROM HISTORY

A681 Firmware Modification History (1000 Sheet Finisher)
Description of Modification
Corrects the following:
•
Paper jams due to an error in the vertical
movement of the tray.
Corrects the following:
•
Jams that occur when the door is opened
during a staple job.
•
After the power is turned on, the copier
reaches ready status even though the shift
tray lower limit sensor is on (and the stack is
full). A jam occurs if a copy job is started.
Corrects the following:
•
The mainframe locks up during jam recovery.
The frequency of occurrence is extremely low.
•
The user cancels the staple job when there is
only one sheet in the staple tray and the sheet
is automatically removed from the tray. A
paper jam occurs when the next sheet is fed
for stapling.
Corrects the following:
•
The jam detection timing has been changed so
the A681 can also be used with the A265 and
A267. This change has no effect on the A232
series.
Corrects the following:
• Stapled paper did not stack straight.
Corrects the following:
•
Paper rolling on the shift tray.
SM
Level
A6815103K
A6815103J
A6815103H
A6815103G
A6815103F
A6815103E
13-25
ROM HISTORY
Prod. Date Ver.
NA K
NA J
NA H
NA G
NA F
NA E
B003/B004/B006/B007