Adf Image Adjustment; Registration - Gestetner B003 Service Manual

COPY ADJUSTMENTS: PRINTING/SCANNING

3.21.3 ADF IMAGE ADJUSTMENT

Registration

1. Make a temporary test chart as shown above using A3/DLT paper.
2. Place the temporary test chart on the ADF and make a copy from one of the
feed stations.
3. Check the registration, and adjust using the following SP modes if necessary.
SP Code
SP6-006-1
SP6-006-2
SP6-006-3
SP6-006-4
⇒
SP6-006-5
B003/B004/B006/B007
B004R511.WMF
What It Does
Side-to-Side Registration
Leading Edge Registration (Simplex)
Leading Edge Registration (Duplex: Front)
Leading Edge Registration (Duplex: Back)
Rear Edge Erase
A
B
B004R508.WMF
3-78
Rev. 07/2004
A: Leading edge registration
B: Side-to-side registration
Adjustment Range
±3.0 mm
±3.0 mm
±4.2 mm
±4.2 mm
±15 mm
SM