Gestetner B003 Service Manual page 633

FAX UNIT
[B]
[A]
13. Cut away the small cover [A] for the first option G3 unit.
NOTE: If there is another G3 option unit, cut away the upper small cover [B].
14. Attach the label [C] to the rear cover.
15. Reattach the covers.
NOTE: Attach the second option NCU board [D] and the second option G3 board
[E] to the upper side as shown.
16. Attach the ferrite core [F] to the cable and connect the cable to the LINE2 jack,
then plug in the machine and turn the main switch on.
17. Enter service mode. Set bit 1 of communication switch 16 to "1" for the first
option G3 unit. Set bit 3 of communication switch 16 to "1" for the second
option G3 unit. After that turn the main switch off and on.
18. Print the system parameter list and ensure that "SG3-V34" is listed as an
option.
19. Set up and program the items required for PSTN-2 communications.
B003/B004/B006/B007
[D]
[C]
B366I107-1.WMF
1-10
[E]
[F]
B367I504.WMF
B366I105.WMF
SM