Main Machine Installation; Installation Procedure - Gestetner B003 Service Manual

1.3.2 INSTALLATION PROCEDURE

[A]
[B]
B004I100.WMF
[D]
1. Remove the main machine from the box, and remove all shipping retainers and
tapes.
NOTE: Store all shipping retainers as you remove them. You will need them if
the machine is moved to another location in the future.
2. Remove scanner cushion [A], and install the end fence [B].
3. Pull out the paper trays and remove all tape and bottom plate stoppers [C].
4. On the right side of the machine, open the by-pass tray, duplex unit, and
transfer right cover, and then remove all the shipping retainers [D]
NOTE: If the paper tray unit is to be installed, do this now. (☛ 1.4)
5. If the paper tray unit is not to be installed, install the middle front cover [E]
(provided in the second paper tray).
SM

MAIN MACHINE INSTALLATION

[C]
B004I103.WMF
1-7
[D]
B004I102.WMF
[E]
B004I101.WMF
B003/B004/B006/B007