Gestetner B003 Service Manual page 263

List Contents
Here is a brief summary of what is contained on the Logging Data List.
• System Counts
Total Count
CE Count
PM Count
Count Timing Printed outputs completed.
No Counts White copied both sides, SMC prints, free runs, DF jams not counted.
Other Single count only, even if double-count selected. (Japan only: (1)
Double count setting cannot be performed, (2) Abnormal coin operations
are counted.)
ARDF Feed-ins
Count Timing Original feed-ins, originals inverted completed.
No Counts ---
Other Feed-in jams.
Scan Starts
Count Timing Engine starts for scanning, image write operations started.
No Counts Prints from external video.
Other Prints from sources other than scanning operation are counted.
Examples: Less than 2 retention copies, SMC prints, white copies
Staples
Count Timing Staple engine cycles completed, number of staples fired.
No Counts Staple jams.
Other ---
Prints by Paper Feeds
Count Timing Paper feeds initiated.
No Counts White duplex copies, SMC prints, free runs, ARDF jams.
Other Jams that interfered with the total count. Trays are counted started from
the Duplex Tray.
Prints by Paper Size
Count Timing Paper feed starts.
No Counts White duplex copies, SMC prints, free runs, ARDF jams.
Other Jams that interfered with the total count.
Scanner SCs
Count Timing SC10n, SC12n occurences counted.
No Counts ---
Other ---
IPU SCs
Count Timing SC19n occurences counted.
No Counts ---
Other ---
Printer SCs
Count Timing SC30n, SC32n, SC35, SC39n, SC40n, SC42n, SC44n, SC49n, SC52n,
SC54n, SC72n occurences counted.
No Counts ---
---
Other
SM
SERVICE PROGRAM MODE
5-57 B003/B004/B006/B007