Gestetner B003 Service Manual page 770

Rev. 02/2002
⇒
B003/B004/B006/B007
DESCRIPTION OF MODIFICATION
•
Corrects the following:
If the user initiates a printout of a Document
Server document while the memory
transmission results report is being printed
out, the document will come out as a blank
page
Some unnecessary (large) log files had been
carried over, causing it to take a very long
time to print out all the log files with this SP
mode.
If a document with cover sheet is sent from a
PC using the LAN FAX driver, the machine
allows the operation of "storing" a document,
even though the SAF memory is full. (i.e.
document is not actually stored).
The DTMF tone is sent to the ISDN-G3 line
after pressing the tone key, even if user
parameter switch 11(0B) is set to 0 (UUI).
When sending with Batch Transmission, the
dedicated transmission parameters are not
applied to destinations entered in with the
ten-key pad. (those entered w/Quick Dials
are fine).
•
Corrects the following:
Communication failure (receiver time out)
sometimes occurs with G4 reception.
The fax option sometimes does not start up
when the main power is turned on.
Documents received in substitute reception
are successfully stored into SAF memory,
however if the main controller goes into
Energy Saver mode during reception, the
files cannot be printed out later.
Country code "1C" for Korea has been
enabled
Fax FCU
Version
01.05.00
02.00.04
03.00.00
04.00.00
SM
FAX OPTION FIRMWARE MODIFICATION HISTORY
N.A.
B3605581A 1st mass production
B3605581B April 2001 prod.
B3605581C May 2001 prod.
B3605581D July 2001 prod.
4-21
FIRMWARE HISTORY
Title FIRMWARE
LEVEL
Document from
B3605581 C
D. Server comes
out blank
SP6-107-001
Large log files
printed out
"Storage" when
SAF memory full
ISDN-G3
transmission
Batch
transmission
G4 reception B3605581 D
failure
Power on failure
Substitute.
reception file
cannot be
printed out
C. code (Korea)
Effective Date
FIRMWARE
VERSION
3.00.00
4.00.00
B003/B004/B00/B007