Feed Out Mechanism - Gestetner B003 Service Manual

FEED OUT MECHANISM

2.5 FEED OUT MECHANISM
[B]
[C]
A681D505.WMF
[A]
The stack feed-out belt [A] and the exit roller feed out the set of stapled copies.
After the copies have been stapled, the stack feed-out motor [B] turns on to drive
the stack feed-out belt.
When the leading edge of the copies reaches the exit rollers, the exit guide plate
motor turns on and the exit roller comes down to transport the set of stapled
copies. Shortly afterwards, the stack feed-out motor stops, and the exit motor feeds
out the stack.
When the stack has been fed out to the shift tray, the stack feed-out motor turns on
again. When the stack feed-out belt HP sensor [C] turns on, the stack feed-out
motor turns off.
SM 13-11 B003/B004/B006/B007