Set Paper Size For Paper Trays - Gestetner B003 Service Manual

Set Paper Size for Paper Trays

1. Press User Tools/Counter
2. On the touch panel, press System Settings.
3. Press the Paper Size Setting tab.
4. Press the button for the tray to change.
5. Change the setting and press the OK button.
6. Repeat for each tray installed.
7. Press Exit twice to return to the main display
• The 1st and 2nd paper trays are provided with paper size dial selectors. The
dial settings on the paper trays have priority over the UP settings. However,
if you select the asterisk (*) position on the paper size dial, you can select the
paper size with the UP setting.
• The 3rd and 4th paper trays of the paper output unit are not equipped with
paper-size selection dials, so you must use the Paper Size UP settings for
the 3rd and 4th trays.
8. Check the copy quality and machine operation.
NOTE: The test pattern print procedure is slightly different for this machine.
Use SP2-902 and select 2 for the IPU Test Print or 3 for the Print Test
Patterns. (☛ Chapter 5, 5.1.3 Test Pattern Printing)
SM
MAIN MACHINE INSTALLATION
.
B004I110.WMF
B004I110.WMF
1-15 B003/B004/B006/B007