IMAGE FUSING AND PAPER EXIT
6.15.6 PRESSURE ROLLER
The pressure springs [A] apply constant
pressure between the hot roller [B] and
the pressure roller [C]. The applied
pressure can be changed by adjusting the
position of the pressure springs. The left
position [D] is the normal setting, and the
right position [E] increases the pressure to
prevent insufficient fusing by the fusing
unit.
6.15.7 CLEANING MECHANISM
The cleaning roller [A], in constant contact
with the pressure roller [B], collects toner and
paper dust from the surface of the pressure
roller. Because the cleaning roller is metal, it
can collect adhering matter better than the
pressure roller, which is coated with Teflon.
B003/B004/B06/B007
6-78
[A]
[D]
[E]
[C]
B004D663.WMF
[B]
B004D515.WMF
[B]
[A]
SM