Gestetner B003 Service Manual page 603

Rev. 09/2002
DESCRIPTION OF MODIFICATION
Firmware modified to correct the following:
1. When the undefined command, "<ESC>&k#w" is
received, it appears on the output as a character string
[e.g. as "<ESC>&k6w"].
2. The punch error is logged in the error report whenever
feeding from the Bypass Tray under any print job
conditions (even when not using the punch unit).
3. When Letterhead is selected as the paper type for the
Bypass tray, the tray icon on the operation panel displays
a "2", indicating that Duplex copies can be made (not
permissible by specification).
4. When printing in duplex, the last odd page is printed on
the reverse side of the last sheet (see FPR reply #OTS-
01-2651 of #RE01060006 for details).
Change in Specification:
1. Supports the Status Readback function of the PCL5e.
2. Added symbol sets PC-858, Latin 9 and Roman 9 for
display of the EURO currency symbol.
Firmware modified to correct the following:
The "XL ERROR" occurs when specifying symbol sets
SETvmath (6M), SETvint (13J) and SETvus (14J) -- which
are not supported in PCLXL.
Change in Specification:
PCL6: Added symbol sets PC-858, Latin 9 and Roman 9 for
display of the Euro currency symbol.
SM
FIRMWARE
LEVEL
B3615902 G
B3615902 H
4-13
SOFTWARE HISTORY
FIRMWARE
VERSION
3.05
3.08
B003/B004/B006/B007