Gestetner B003 Service Manual page 691

BIT SWITCHES
Communication Switch 02
No FUNCTION
3 Hang-up decision when a
negative code (RTN or PIN) is
received during G3 immediate
transmission
0: No hang-up, 1: Hang-up
4-6 Not used
7 Method of total error rate
calculation
0: Normal method
1: French PTT requirement
Communication Switch 03
No FUNCTION
0 Maximum number of page
to retransmissions in a G3
7 memory transmission
Communication Switch 04 - Not used (do not change the settings)
Communication Switch 05 - Not used (do not change the settings)
Communication Switch 06 - Not used (do not change the settings)
B003/B004/B006/B007
COMMENTS
0: The next page will be sent even if RTN or PIN is
received.
1: The machine will send DCN and hang up if it
receives RTN or PIN.
This bit is ignored for memory transmissions or if
ECM is being used.
Do not change the settings.
0: Error rate is calculated by dividing the number of
total lines by the number of error lines.
1: Error rate is calculated by dividing the number of
total plus error lines by the number of error lines.
COMMENTS
00 - FF (Hex) times.
This setting is not used if ECM is switched on.
Default setting - 03(H)
3-34
SP No. 1-104-003
SP No. 1-104-004
SM