Currents Applied To Leading Edge And Image Areas, And For By-Pass Feed - Gestetner B003 Service Manual

Currents applied to leading edge and image areas, and for by-pass feed

Transfer current can also be adjusted for the leading edge and the image area, and
for by-pass feed. The timing for starting to apply leading edge current, for the
switchover from leading edge current to image area current, and for switching off at
the trailing edge can also be changed.
The table below lists the SP modes you can use to adjust these settings.
SP2-301 Transfer Current Adjustment
Image areas SP2-301-1
SP2-301-2
SP2-301-4
Leading edge SP2-301-3
areas
SP2-301-5
SP2-911 Transfer Current Timing
Timing SP2-911-1
SP2-911-2
SP2-911-3
SM
IMAGE TRANSFER AND PAPER SEPARATION
1st Side of Paper
2nd Side of Paper
By-pass Feed
Leading Edge
Leading Edge By-pass Feed
On Timing
Switch Timing
Off Timing
6-73 B003/B004/B006/B007