Memory (G578/G) - Gestetner B003 Service Manual

MEMORY (G578/G579)
1.4 MEMORY (G578/G579)
!
CAUTION
Unplug the main machine power cord before starting the following
procedure.
NOTE: To install the memory option, the printer option (B361) must be installed
first. Please refer to section 1.2 for details of the printer option installation
procedure.
1. Remove the left rear cover [A] (2 screws).
2. Remove the controller board [B] (2 screws).
3. Remove the HDD [C] (2 connectors,
3 screws).
4. Install the memory DIMM [D] onto the
controller board [E].
5. Re-install the HDD and put back the
controller board.
6. Replace the left rear cover.
B003/B004/B006/B007
[B]
[C]
1-8
[A]
B361I101.WMF
B361I102.WMF
[D]
[E]
B361I117.WMF
SM