Ipv4 Duplicate - Xerox Phaser 6000 Service Manual

Error Messages and Codes

IPv4 Duplicate

Applicable Error
3-58
Duplicate IPv4 addresses detected upon startup.
• 027-452: IPv4 Duplicate
Troubleshooting Procedure Table
Step Actions and Questions
1
At the printer's Control Panel, press
the Menu key. Using the Up Arrow,
Down Arrow, and OK keys, navigate
to Admin Menu > Network Settings
>TCP/IP > IPv4 > Get Address.
Is Get Address set to Panel?
Xerox Internal Use Only
Yes No
The printer is Another device
trying to use an is trying to use
address that is the printer's
being used by address. Find
another device the other
on the network. device and
Change the resolve the
printer's problem by
address. changing the
other device's
address.
Phaser 6000/6010 and WC 6015 MFP