ADF Cover Open
Phaser 6000/6010 and WC 6015 MFP
Troubleshooting Procedure Table (Continued)
Step
Actions and Questions
8
Replace the IP Board (page 8-114).
Does the error persist?
The ADF cover is open.
Applicable Error
•
005-301: ADF Cover Open
Initial Actions
•
Cycle printer power.
•
If the problem persists, use the following procedure.
Troubleshooting Reference Table
Applicable Parts
IP Board, PL7.1.9
ADF Assembly, PL8.1.1
Troubleshooting Procedure Table
Step
Actions and Questions
1
Is the ADF Cover completely closed? Go to step 3.
2
Does the error persist?
3
Is the ADF Cover damaged?
4
Does the error persist?
5
Reseat P/J1, P/J6, and P/J16 on the
IP Board.
Does the error persist?
Xerox Internal Use Only
Error Messages and Codes
Yes
Replace the
ADF Cover
(page 8-39)
and ADF
Separator Pad
(page 8-40).
Wiring and Plug/Jack Map References
"Map 2 - WorkCentre 6015 MFP" on
page 10-22
"WorkCentre 6015 MFP Scanner" on
page 10-33
Yes
Go to step 3.
Replace the
ADF Cover
(page 8-39). Go
to step 4.
Go to step 5.
Go to step 6.
No
Complete.
No
Close the ADF
cover and go
to step 2.
Complete.
Go to step 5.
Complete.
Complete.
3-25