System Restart - Xerox Phaser 6000 Service Manual

Error Messages and Codes

System Restart

Applicable Errors
Initial Actions
3-110
An internal IP Board error occurred.
062-360: System Restart
117-331: System Restart
117-332: System Restart
117-333: System Restart
117-334: System Restart
117-340: System Restart
117-342: System Restart
117-343: System Restart
• Cycle printer power.
• If the problem persists, use the following procedure.
Troubleshooting Reference Table
Applicable Parts
IP Board, PL7.1.9
Troubleshooting Procedure Table
Step Actions and Questions
1 Check the connectors on the IP
Board.
Are the connections secure?
2 Does the error persist?
3 Replace the IP Board (page 8-114).
Does the error persist?
Xerox Internal Use Only
117-344: System Restart
117-346: System Restart
117-348: System Restart
117-349: System Restart
117-350: System Restart
117-351: System Restart
117-366: System Restart
Wiring and Plug/Jack Map References
"Map 2 - Phaser 6000/6010" on
page 10-8
"Phaser 6000/6010 Image Processor
Board" on page 10-18
"Map 2 - WorkCentre 6015 MFP" on
page 10-22
"WorkCentre 6015 MFP Image
Processor Board" on page 10-32
Yes
Go to step 3.
Go to step 3.
Phaser 6000/6010 and WC 6015 MFP
No
Securely
reconnect the
connectors,
then go to
step 2.
Complete.
Complete.