Xerox Phaser 6000 Service Manual page 465

Phaser 6000/6010 and WC 6015 MFP
23. Remove 5 screws (silver, tap, 8 mm), 2 screws (silver, M4, 6 mm), and 1 screw
(silver, M3, 6 mm), and lay the MU Drive Assembly on the work surface.
Caution
The MU Drive Assembly has a ground strap welded to it. Take care to not
damage the strap.
Replacement Note
When replacing the MU Drive Assembly, loosely install the 5 numbered screws
first, and then tighten screw number 1 through 5 in that order.
24. Remove the 4 screws (silver, tap, 8 mm) that fix the xerographics assembly to
the printer.
Xerox Internal Use Only
Service Parts Disassembly
2 2
4 4
1 1
5 5
3 3
s6000-097
s6000-098
8-71