Xerox Phaser 6000 Service Manual page 294

Troubleshooting
Exit Sensor
4-46
1. Enter Service Diagnostics (page 4-11).
2. Use the Up and Down Arrow buttons to select Printer > IOT Diag > DI-4.
3. Operate the actuator to check sensor function.
4. Confirm the number shown on the display increases every time the actuator is
operated.
5. Press the Stop button to stop the test.
Actuator
Xerox Internal Use Only
Exit Sensor
Paper
Paper
Phaser 6000/6010 and WC 6015 MFP
s6000-143