Service Parts Disassembly
8-84
•
WorkCentre 6015 MFP: Remove the Rear Cover (page 8-24).
Remove the 5 screws (silver, M3, 6 mm), and remove the IP Board plate
from the printer.
Note
To gain access to the lower screw on the face of the IP Board plate,
unhook the Main Paper Tray Harness Guide from the IP Board plate.
10. On the MCU Board, disconnect the harness at P/J10, and then unlace the
harness from the harness guide.
11. Disconnect the connectors on the MCU Board as shown in the following
illustration.
Xerox Internal Use Only
P/J16
P/J10
P/J19
P/J25
P/J23
P/J14
P/J12
Phaser 6000/6010 and WC 6015 MFP
s6015-031
s6000-119