Xerox Phaser 6000 Service Manual page 378

Adjustment and Calibration
6-6
Printing the Color Registration Correction Chart
1. On the printer control panel, press the Menu button.
2. Press the Down Arrow button to go to Admin Menu and then press the OK
button.
3. Press the Down Arrow button to scroll to Maintenance Mode and press OK.
4. Press the Down Arrow button to scroll to Adjust Color Regi and press OK.
5. Press the Down Arrow button to scroll to Color Regi Chart and press OK.
The Color Registration Chart prints.
6. Continue to "Determining the Color Registration Values" on page 6-6 to
determine if an adjustment is necessary.
Determining the Color Registration Values
The Color Registration Chart shows horizontal and vertical values for each color.
Vertical registration values are at the top of the page:
• Y = Paper feed direction Yellow
• M = Paper feed direction Magenta
• C = Paper feed direction Cyan
Left side registration values are on the left side of the page:
• LY = Left Yellow
• LM = Left Magenta
• LC = Left Cyan
Right side registration values are on the right side of the page:
• RY = Right Yellow
• RM = Right Magenta
• RC = Right Cyan
To determine the vertical values:
1. In the upper section of the Color Registration Chart, vertical color lines are
printed in gaps between corresponding vertical Black lines. The line sets are in
color groups: Y, M, or C. Each set of lines has a corresponding number printed
above it. In each color group, identify the set of lines in which the color line is
perfectly aligned between the corresponding Black lines. Refer to the enlarged
illustration on the chart that shows how to determine the closest number.
2. For each color, do one of the following:
• If zero (0) is the value on the color set that is most closely aligned, you do
not need to adjust that color.
• If zero (0) is not the value on the color set that is most closely aligned,
circle the number that is closest.
To determine the horizontal values:
1. In the left and right sections of the Color Registration Chart, horizontal color
lines are printed in the gaps between corresponding Black lines. Each group of
lines is arranged in a group under the corresponding letters LY, LM, LC, RY, RM,
and RC. Each set of lines has a corresponding number printed to the right of it.
Xerox Internal Use Only Phaser 6000/6010 and WC 6015 MFP