First Print Output Time - Xerox Phaser 6000 Service Manual

General Information
Warm Up Time

First Print Output Time

1-26
Operating Modes (Continued)
Mode Condition
Power Saver
Mode 1
Fusing
Exposure
system
Recording
system
Cooling fan
Power Saver
Mode 2
Fusing
Exposure
system
Recording
system
Cooling fan
The printer reaches the Ready state within 36 seconds after power on, transition
from Low Power to Ready, and transition from Sleep to Ready.
First Print Output Time (FPOT) is defined as the time from when the engine
receives a Start signal, until a single A4 sized page is printed and delivered to the
output tray.
Printer Color Mode
Phaser Color
6000B
Black and
white
Phaser Color
6010N,
WorkCentre
Black and
6015 MFPs
white
Xerox Internal Use Only
Definition
The printer enters Power Saver Mode 1
when it has not received print data for the
specified time.
The system is at Pause.
The system is at Pause.
The system is at Pause.
The system is at Pause.
The printer enters Power Saver Mode 2 to
reduce power consumption.
The system is at Pause.
The system is at Pause.
The system is at Pause.
The system is at Pause.
FPOT (sec.)
Power Saver
Ready Mode Mode 2
29 seconds or 54 seconds or
less less
24 seconds or 49 seconds or
less less
27 seconds or 52 seconds or
less less
22 seconds or 47 seconds or
less less
Phaser 6000/6010 and WC 6015 MFP
After Power-on
54 seconds or
less
49 seconds or
less
52 seconds or
less
47 seconds or
less