Drive Assemblies - Xerox Phaser 6000 Service Manual

Drive Assemblies

Phaser 6000/6010 and WC 6015 MFP
Major Functions
• Main Drive Assembly
A motor for driving components such as MU Drive Assembly, Feed Drive
Assembly, and the Fuser.
• Developer Drive Assembly
An assembly to relay torque from the Main Drive Assembly to the MU Drive
Assembly.
Contains the Switching Solenoid and the Switching Sensor.
• Switching Sensor
Detects whether the printer is running in the full color mode or the B/W
mode based on the position of the actuator. (Full Color mode: Sensor
beam is received)
• Switching Solenoid
Switches between the full color mode and the B/W mode by
disconnecting the imaging units for Yellow, Magenta, and Cyan from the
torque from the Main Drive Assembly in the B/W mode. See "Full Color
Mode and B/W Mode" on page 2-40.
• Feed Drive Assembly
An assembly that rotates the Paper Feed and Registration Roller by the torque
from the Main Drive Assembly.
• MU Drive Assembly
An assembly that rotates the transfer belt, drums (YMCK), and the augers and
magnet rolls in the Developer Drive Assembly by the torque from the Main
Drive Assembly.
Xerox Internal Use Only
Main Drive
Drive Gear Assembly
Developer Drive Assembly
Theory of Operation
MU Drive Assembly
Switching Solenoid
Switching Sensor
s6000-106
2-39