Iit Procedures; Workcentre 6015 Mfp Scanner Assembly - Xerox Phaser 6000 Service Manual

Color laser printer/multi-funtion printer

Hide thumbs Also See for Phaser 6000:

Table of Contents

IIT Procedures

PL8.1.1/PL9.1.1

Phaser 6000/6010 and WC 6015 MFP

This procedures applies to the WorkCentre 6015 MFP.

1. Remove the Main Paper Tray Cover (page 8-29).

2. Remove the Output Tray Extension (page 8-31).

3. Open the Toner Door.

4. Remove the Front Cover (page 8-34).

5. Remove the Left Side Cover (page 8-29).

6. Disconnect P/J1, P/J6, and P/J16 on the IP Board. If the printer has an ADF,

remove 1 screw (silver, M3, 6 mm) to disconnect the ADF ground wire from the

Grounding Wire and screw: ADF Only

Xerox Internal Use Only

Service Parts Disassembly

Show Quick Links

Table of Contents

Workcentre 6015 mfp Phaser 6010