Table of Contents
Advertisement
TCP/IP
TCP/IP
These instructions show you how to configure the following via Internet Services:
•
TCP/IP v4 and v6
•
Domain Name
•
DNS
Zero Configuration Networking
•
The machine supports TCP/IP versions 4 and 6. IPv6 can be used instead of or in addition to IPv4.
IPv4 and IPv6 settings can be configured directly at the machine user interface, or remotely, via a web
browser using Internet Services. To configure TCP/IP settings using Internet Services, refer to
TCP/IP Settings using Internet Services
Configure Static IPv4 Addressing using the Machine User Interface
Information Checklist
Before starting please ensure that the following items are available and/or the tasks have been
performed:
•
Existing operational network utilizing the TCP/IP protocol.
•
Ensure that the machine is connected to the network.
•
Static IP Address for the machine.
•
Subnet Mask Address for the machine.
•
Gateway Address for the machine.
•
Host Name for the machine.
Procedure
Enter a Static IP Address:
1.
Press the Machine Status button on the control panel.
2.
Press the Up/Down arrow buttons to highlight Network Settings; press OK.
3.
Enter the Administrator Password using the alphanumerical keypad. The default is 1111. Refer to
Administrator Access
Press the OK button; the Network Settings menu displays.
4.
5.
Press the Up/Down arrow buttons to highlight TCP/IP(IPv4); press OK.
6.
Press the Up/Down arrow buttons to highlight Static; press OK.
7.
Press the Up/Down arrow buttons to highlight IPv4 Address; press OK.
8.
Enter the IP Address using the alphanumerical keypad; press OK.
9.
Enter details for Subnet Mask using the alphanumerical keypad; press OK.
10. Enter details for Gateway using the alphanumerical keypad; press OK.
11. The Saved screen will display and return to the Network Settings menu.
28
Xerox WorkCentre 3315DN/3325DN/3325DNI
System Administrator Guide
on page 30.
on page 19.
Configure
Advertisement
Table of Contents
