Xerox Phaser 6000 Service Manual page 286

Troubleshooting
4-38
Control Panel
Test (WorkCentre 6015 MFP)
Test Print
TestPatASIC[IOT]
TestPatLPHY[IOT]
TestPatLPHM[IOT]
TestPatLPHC[IOT]
TestPatLPHK[IOT]
Parameter Reads/writes the parameter values, errors, and life counter values
stored in the printer.
NOTE Print the parameter list using the Print function found in the Parameter Menu
Regi Value
X Margin Y, M, C, K -137 to 137
Y Margin Y, M, C, K -3780 to 3780
Skew Y, M, C, K
-630 to 630
See the following illustration for additional explanation.
Shifts the print area in this
direction by reducing the value.
Y Margin Y, M, C, K
Shifts the print area in
this direction by reducing
the value.
Shifts the print area in
this direction by
increasing the value.
Life
Counter Name Value
These counter values are for
reference only. Do not use as
the official value.
M/C Total PV 30000
M/C FC PV -
Xerox Internal Use Only
Test Description
Prints the selected test print. For
information on the test prints, see
"WorkCentre 6015 MFP Test Prints" on
page 5-38.
before changing the registration values.
Adjusts registration in the feed
direction.
Adjusts registration in the scan
direction.
Adjusts the skew so that the image is
parallel with both sides of the paper.
direction by increasing the value.
X Margin Y, M, C, K
Image Side
Default
Value
Phaser 6000/6010 and WC 6015 MFP
Shifts the print area in this
Default
Value
s6000-229