Xerox Phaser 6000 Service Manual page 143

Phaser 6000/6010 and WC 6015 MFP
Error Message Summary (Continued)
Error
Code Error Message LCD
016-502 Write Flash Error
016-502 System
Contact Support
If Message Returns
016-503 SMTP Error
016-504 016-50X Scan
016-506 Job Failure
016-507 Press OK
016-718 Memory Full
016-718 Printer
Job too Large
Press OK
016-719 Decode Error
016-719 Printer
Job Failure
Press OK
016-720 PDL Request
016-720 Printer
Data Violation
Press OK
016-737 Format Error
Press OK Button
016-741 Protection Error
Press OK Button
016-742 Invalid ID
Press OK Button
016-743 Range Chk Error
Press OK Button
016-744 Format Error
016-744 System
Invalid Data
Press OK
016-745 Format Error
016-745 System
Invalid Data
Press OK
016-749 PJL Request
016-749 Printer
Data Violation
Press OK
016-764 Connect Fail
016-764 Scan
Job Failure
Press OK
Xerox Internal Use Only
Error Messages and Codes
Error Description
<Download Error>
When downloading, error is
detected.
An E-mail Error has occurred.
<Memory Over flow>
The current printing job process
cannot be continued because the
memory capacity is exceeded.
<Decode error>
Decode error is detected.
<PDL Error>
The print data cannot be processed
by PDL.
<Download Format Error>
The format is invalid.
<Download Protect Error>
The Protect is invalid.Download
was attempted under the condition
where it is prohibited.
<Download ID Error>
An error occurred because an
invalid firmware is installed.
<Download Range Error>
The address of the write
destination is invalid.
<Download Format Error>
Invalid code to be downloaded.
<Download Format Error>
Invalid code to be downloaded.
<PJL Request Error>
The print data cannot be processed
by PJL.
<Connect Error>
Can not connect to mail server for
sending mail.
Go to
3-31
3-32
3-38
3-39
3-40
3-35
3-35
3-35
3-35
3-35
3-35
3-37
3-40
3-7