Fax Specifications (Workcentre 6015N/Ni Color Mfp) - Xerox Phaser 6000 Service Manual

General Information

Fax Specifications (WorkCentre 6015N/NI Color MFP)

1-20
Scanning Specifications (Continued)
Characteristic
Platen
Document Setting Reference
Position
Document Glass Size
ADF
Resolution (Line Density in Fast
Scan Direction)
Document Thickness
Capacity
Fax Specifications
Characteristic
Communication Mode
Direct Fax
Facsimile Communication
Network (FAX NET)
Fax Send/Receive Buffer
Supported Network
Supported Protocols
Transfer
Walk-up Fax
Incoming Call Control
Color Fax
Resolution
Xerox Internal Use Only
Specifications
Left rear corner as viewed from printer front.
220 mm x 300 mm (8.66 in. x 11.8 in) (Flat
glass area)
1200 dots/25.4 mm (1200 dots/1 inch)
2 2
60 g/m to 105 g/m
15 sheets (plain paper)
Specifications
Priority 1: ITU-T Super G3
Priority 2: ITU-T G3 ECM
Priority 3: ITU-T G3
Supported
Not supported
2 MB
PSTN, PBX
NOTE The printer can not be connected to an ISDN
network.
V. 34 (Max.33.6 kbps)
V. 17 (14.4/12/9.6/7.2 kbps)
V. 29 (9.6/7.2 kbps)
V. 27ter (4.8/2.4 kbps)
If the machine cannot print received FAX data
because of printer trouble, or when the user
specifies transfer of received data, received
data is automatically sent to a pre-registered
machine.
Settings: OFF, Forward only, or Print & Forward.
Telephone Mode, Auto Receive, iFax, Tel/Fax,
Ans/Fax, DRPD
Not supported
Standard, Fine, Super Fine, and Ultra Fine
Phaser 6000/6010 and WC 6015 MFP