Ipv6 Duplicate - Xerox Phaser 6000 Service Manual

IPv6 Duplicate

Phaser 6000/6010 and WC 6015 MFP
Duplicate IPv6 addresses detected upon startup.
Applicable Error
• 027-446: IPv6 Duplicate
Initial Actions
• Cycle printer power.
• If the problem persists, use the following procedure.
Troubleshooting Reference Table
Applicable Parts
IP Board, PL7.1.9
MCU Board, PL7.2.2
Troubleshooting Procedure Table
Step Actions and Questions
1 Reseat the connectors on the IP and
MCU Boards then cycle system
power.
Does the error persist?
2 Replace the IP Board (page 8-114).
Does the error persist when the
power is turned off and on?
Xerox Internal Use Only
Error Messages and Codes
Wiring and Plug/Jack Map References
"Phaser 6000/6010 Image Processor
Board" on page 10-18
"Map 2 - Phaser 6000/6010" on
page 10-8
"WorkCentre 6015 MFP Image
Processor Board" on page 10-32
"Map 2 - WorkCentre 6015 MFP" on
page 10-22
Yes
Go to step 2.
Replace the
MCU Board.
No
Complete.
Complete.
3-57