Feed Solenoid - Xerox Phaser 6000 Service Manual

Troubleshooting

Feed Solenoid

4-30
The Feed Roller rotates when the Main Motor (FULL) and the Feed Solenoid tests
are executed simultaneously.
1. Enter Service Diagnostics (page 4-11).
2. Remove the Bypass Tray.
3. Run the Main Motor Full and Feed Solenoid tests: go to Engine Diag > Motor
Test > Main Motor Full and press OK, then scroll down to Feed Solenoid and
press OK.
4. Check that the Feed Roller rotates.
5. Press the Cancel button to stop the Feed Solenoid test.
6. Use the Down Arrow to scroll to the motor test, and press Cancel to stop the
motor test.
7. Replace the Bypass Tray.
Xerox Internal Use Only
Feed Roller
Phaser 6000/6010 and WC 6015 MFP
s6000-150