Vertical Blank Lines - Xerox Phaser 6000 Service Manual

Vertical Blank Lines

Phaser 6000/6010 and WC 6015 MFP
There are faded or completely non-printed lines along the page in the direction of
the paper travel from the leading edge to the trailing edge.
Initial Actions
• Clean the LED windows. See "Cleaning the LED Windows" on page 7-3.
• Ensure there is no debris on the media path.
Troubleshooting Reference Table
Applicable Parts
Transfer Roller, PL1.1.9
Fuser, PL5.1.1
Troubleshooting Procedure Table
Step Actions and Questions
1
Check media condition.
Is the media dry and approved for
use?
2 Does the image print correctly?
3 Replace the Transfer Roller
(page 8-14).
Does the image print correctly?
4 Replace the Fuser (page 8-80).
Warning:
Xerox Internal Use Only
Example Print
Allow the Fuser to cool
before replacing.
Image Quality
Vertical Blank Lines
Yes No
Go to step 3. Replace with
dry, approved
media, then go
to step 2.
Complete. Go to step 3.
Complete. Go to step 4.
Complete.
5-21