Xerox Phaser 6000 Service Manual page 608

Reference
A-10
Test Procedure
NO PAPER SNR 1. Power on the printer, and start the CE Diag Tool.
2. Click the CE Diag tab, and then select Digital Input.
3. Select the NO PAPER SNR test, and click the OK button.
4. Insert a sheet into the Main Paper Tray to check whether the
sensor functions properly.
6. Click the Stop button to stop the test.
Test example:
[23:58]
Digital Input Mode = ENTRY
[23:58]
No PAPER SNR = LOW
STARTED = No PAPER SNR
[23:58]
No PAPER SNR = HIGH
STARTED = No PAPER SNR
[23:58]
No PAPER SNR = LOW
STARTED = No PAPER SNR
[23:58]
Digital Input Mode = EXIT
Xerox Internal Use Only
Paper
Phaser 6000/6010 and WC 6015 MFP
s6000-141