USB Memory Write Protect Error / File Path Limit Error
Phaser 6000/6010 and WC 6015 MFP
A communication error occurred during a scan job.
Applicable Error
•
026-722: USB Memory Write Error
•
026-723: File Path Limit Error
Initial Actions
•
Check that the USB Cable connected to the printer and the PC is securely
connected.
•
Cycle printer power.
•
If the problem persists, use the following procedure.
Troubleshooting Reference Table
Applicable Parts
IP Board, PL7.1.9
MCU Board, PL7.2.2
Troubleshooting Procedure Table
Step
Actions and Questions
1
Check the connectors on the IP
Board.
Are the connections secure?
2
Does the error persist?
3
Replace the IP Board (page 8-114).
Does the error persist?
4
Replace the MCU Board
(page 8-121).
Xerox Internal Use Only
Error Messages and Codes
Wiring and Plug/Jack Map References
"Phaser 6000/6010 Image Processor
Board" on page 10-18
"Map 2 - Phaser 6000/6010" on
page 10-8
"WorkCentre 6015 MFP Image
Processor Board" on page 10-32
"Map 2 - WorkCentre 6015 MFP" on
page 10-22
Yes
Go to step 3.
Go to step 3.
Go to step 4.
Complete.
No
Securely
reconnect the
connectors,
then go to
step 2.
Complete.
Complete.
3-55