NEC Univerge SV8100 Features And Specifications Manual page 74

Issue 1.0
Related Features
Answer Key
Central Office Calls, Answering
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-12-02 Service Code Setup (for Service
Access) – Answer for Park Hold
15-02-06 Multiline Telephone Basic Data
Setup – Hold Key Operating Mode
15-07-01 Programmable Function Keys
11-12-32 Service Code Setup (for Service
Access) – Answer for Park Hold
20-09-01 Class of Service Options
(Incoming Call Service) – Second
Call for DID/DISA/DIL/E&M
Override
2 - 50
Description/Comments
Assign for a key on the multiline
terminal or single line telephone for
park hold.
Use this option to set the function of
the Multiline Hold key. The Hold key
can activate normal Hold or
Exclusive Hold.
Assign a park group to multiline
terminal line key.
Assign for a key on the multiline
terminal or single line telephone for
park hold.
Turns Off (0) or On (1) the extension
ability to receive a second call from a
DID, DISA, DIL, or tie line caller.
With this option set to 1, the
destination extension must be
busy for a second DNIS caller to
ring through. If the destination
extension does not have a trunk
or CAP key available for the
second call and a previous call is
ringing the extension but has not
yet been answered, the second
caller hears busy regardless of
this program setting.
UNIVERGE SV8100
Assigned Data
MLT, SLT
(default = 6)
0 = Normal (Common)
1 = Exclusive Hold
(default = 0)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code) (Service
Code 752 by default)
MLT, SLT
(default = 6)
0 = Off
1 = On
(default = 1 for COS
01~15)
Answer Hold
Level
1 2 3