NEC Univerge SV8100 Features And Specifications Manual page 301

UNIVERGE SV8100
Program
Program Name
Number
21-14-02 Walking Toll Restriction
Password Setup – Walking Toll
Restriction Class Number
35-02-01 SMDR Output Options – Toll
Restricted Call
35-02-02 SMDR Output Options – PBX
Calls
35-02-03 SMDR Output Options – Trunk
Number or Name
35-02-04 SMDR Output Options –
Summary (Daily)
35-02-05 SMDR Output Options –
Summary (Weekly)
35-02-06 SMDR Output Options –
Summary (Monthly)
35-02-07 SMDR Output Options – Toll
Charge Cost
35-02-08 SMDR Output Options – Incoming
Call
35-02-09 SMDR Output Options –
Extension Number or Name
35-02-10 SMDR Output Options – All Lines
Busy (ALB) Output
35-02-12 SMDR Output Options – DID
Table Name Output
35-02-13 SMDR Output Options – CLI
Output When DID to Trunk
35-02-14 SMDR Output Options – Date
SV8100 Features and Specifications Manual
Description/Comments
Enter the Walking Toll Restriction Class of
Service (1~15) to be used for each table
number assigned in Program 21-14-01.
SMDR can include or exclude calls
blocked by Toll Restriction.
When the system is behind a PBX, SMDR
can include all calls or just calls dialed
using the PBX trunk access code.
Select whether the system should display
the trunk Name (0) or the Number (1) on
SMDR reports.
If this option is set to 0, Program 35-
02-14 must be set to 0.
Set this option to (1) to have the SMDR
report provide a daily summary (at
midnight every night).
Set this option to (1) to have the SMDR
report provide a weekly summary (every
Saturday at midnight).
Set this option to (1) to have the SMDR
report provide a monthly summary (at
midnight on the last day of the month).
Set this option to (1) have the SMDR
report include toll charges.
Enable this option (1) to have the SMDR
report include incoming calls. If you
disable this option (0), incoming calls do
not print.
Set this option (1) to have the SMDR
report include extension numbers. Set
this option (0) to have the SMDR report
include extension names.
Determine if the All Lines Busy (ALB)
indication should be displayed.
Determine if the DID table name should
be displayed.
Determine if the CLI output should be
displayed for DID.
Determine whether the date should be
displayed on SMDR reports.
This option must be set to 0 if the
trunk name is set to be displayed in
Program 35-02-03.
Issue 1.0
Level
Assigned Data
1
1~15
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Name
1 = Number
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Name
1 = Number
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 0)
0 = Not Displayed
1 = Displayed
(default = 0)
0 = Not Displayed
1 = Displayed
(default = 0)
0 = Not Displayed
1 = Displayed
(default = 0)
2 3
2 - 277