NEC Univerge SV8100 Features And Specifications Manual page 749

UNIVERGE SV8100
Related Features
Handsfree Answerback/Forced Intercom Ringing
Hotel/Motel
Programmable Function Keys
UM8000 Mail
VM8000 InMail
Voice Response System (VRS)
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-10-16 Service Code Setup (for System
Administrator) – Leaving
Message Waiting (Requires CPU
to be licensed for Hotel/Motel)
11-11-09 Service Code Setup (for Setup/
Entry Operation) – Answer
Message Waiting
11-11-10 Service Code Setup (for Setup/
Entry Operation) – Cancel All
Messages Waiting
11-11-11 Service Code Setup (for Setup/
Entry Operation) – Cancel
Message Waiting
11-16-07 Single Digit Service Code Setup
– Message Waiting
SV8100 Features and Specifications Manual
Description/Comments
Use to customize the leave
message waiting Service Codes
(requires CD-CP00-AU to be
licensed for Hotel/Motel).
Use to customize the answer
message waiting service code.
Used to customize the Cancel All
Messages Waiting service code.
Use to cancel message waiting
used for registration and setup.
Customize the message waiting
Service Codes used to set
message waiting when a busy or
ring back signal is heard.
Assigned Data
1
MLT
(default = 626)
MLT, SLT
(default = 0)
MLT, SLT
(default = 773)
MLT, SLT
(default = 771)
(default = 0)
Issue 1.0
Level
2 3
2 - 725