NEC Univerge SV8100 Features And Specifications Manual page 734

Issue 1.0
Paging, Internal
Programmable Function Keys
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-12-21 Service Code Setup (for Service
Access) – Meet-Me Answer to
Specified Internal Paging Group
11-12-22 Service Code Setup (for Service
Access) – Meet-Me Answer to
External Paging
11-12-23 Service Code Setup (for Service
Access) – Meet-Me Answer in
Same Paging Group
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
20-10-06 Class of Service Options
(Answer Service) – Meet-Me
Conference and Paging
2 - 710
Description/Comments
Use to customize the Service
Codes used for meet-me answer
to specified internal paging group
service access.
Use to customize the Service
Codes used for meet-me answer
to external paging service access.
Use to customize the Service
Codes used for meet-me answer
in same paging group service
access.
Assign function keys for External
Zone Paging (code 19 + zone),
External All Call Paging (code 20),
Internal Zone Paging (code 21 +
zone) or Meet Me Conference/
Paging Pickup (code 23).
Assign a Class of Service (1~15)
to an extension.
Turns Off (0) or On (1) an
extension to use Meet-Me
Conference and Paging.
UNIVERGE SV8100
Assigned Data
MLT, SLT
(default = 764)
MLT, SLT
(default = 765)
MLT, SLT
(default = 763)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code) (Service
Code 752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port =
Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
Meet Me Paging
Level
1 2 3