NEC Univerge SV8100 Features And Specifications Manual page 403

UNIVERGE SV8100
Program
Program Name
Number
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
20-13-23 Class of Service Options
(Supplementary Service) –
Display the Reason for
Transfer
21-01-02 System Options for Outgoing
Calls – Intercom Interdigit
Time
22-01-06 System Options for Incoming
Calls – DID Ring-No-Answer
Time
22-02-01 Incoming Call Trunk Setup
SV8100 Features and Specifications Manual
Description/Comments
Turns Off or On the extension ability
to receive a second call from a DID,
DISA, DIL, or tie line caller.
With this option set to 1, the
destination extension must be
busy for a second DNIS caller
to ring through. If the
destination extension does not
have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless of
this program setting.
Select whether an extension should
display the reason a call is being
transferred to their extension (Call
Forward Busy, Call Forward No
Answer, DND).
Set the time-out interval for DID
callers that do not dial. After this
time, the DID call routes according to
Vacant Number Intercept
programming.
Set the DID Ring No Answer (RNA)
Intercept time (0~64800 seconds).
In systems with RNA Intercept, the
DID call rings the destination
extension for this time, and then
rings Intercept Ring Group. (default:
20).
For each Night Service Mode, enter
service type 3 when the trunk should
be a DID trunk.
Assigned Data
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0~64800 (seconds)
(default = 10 seconds)
0~64800 (seconds)
(default = 20 seconds)
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Issue 1.0
Level
1 2 3
2 - 379