NEC Univerge SV8100 Features And Specifications Manual page 373

UNIVERGE SV8100
Program
Program Name
Number
11-11-28 Service Code Setup (for Setup/
Entry Operation) – Delayed
Transfer for Every Extension
Group
11-11-29 Service Code Setup (for Setup/
Entry Operation) – Delayed
Transfer Cancellation for Each
Extension Group
11-12-09 Service Code Setup (for Service
Access) – Change to STG
(Department Group) All Ring
11-16-10 Single Digit Service Code Setup –
(Department) STG All Ring Mode
15-07-01 Programmable Function Keys
16-01-01 Department Group Basic Data
Setup – Department Name
16-01-02 Department Group Basic Data
Setup – Department Calling Cycle
16-01-03 Department Group Basic Data
Setup – Department Routing
When Busy (Auto Step Call)
16-01-04 Department Group Basic Data
Setup – Hunting Mode
SV8100 Features and Specifications Manual
Description/Comments
Use this service code to set the
delayed transfer destination
Department Group.
Use this service code to cancel the
delayed transfer destination
Department Group.
Use this option to set the service
code for ringing all members of a
Department Group.
Assign the Single Digit (post-dialing)
Service Code for All Member Ring.
Assign a Department Calling key
(46) so extension users can install
or remove themselves from the
Department Calling Group.
Additional keys can also be
assigned for Department Group
features immediate calling
destination (58), delayed calling
destination (59) and DND
destination (60).
Assign a name to the Extension
(Department) Groups.
Set the routing cycle for calls into a
department (i.e., when a user dials
the department pilot number). The
system can ring the highest priority
extension available (Priority
Routing, 0) or cycle in circular order
to a new idle extension for each
new call (Circular Routing, 1).
Set how the system routes an
Intercom call to a busy Department
Group member. The caller can hear
busy tone (0) or overflow to the first
available Department Group
member (1). This option is for
Intercom calls to an extension, not a
pilot number.
Set if an unanswered call should
hunt once stopping at the last
member tried (0) or continually hunt
through the idle members (1).
Assigned Data
MLT, SLT
(default = 605)
MLT, SLT
(default = 606)
MLT, SLT
(default not assigned)
(default not assigned)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code) (Service
Code 752 by default)
Maximum 12 characters
(default not assigned)
0 = Normal Routing
(Priority)
1 = Easy – UCD Routing
(Circular)
(default = 0)
0 = Normal (Intercom
caller to busy
department member
hears busy)
1 = Circular (Intercom
callers to busy
department member
routes to idle member)
(default = 0)
0 = Last extension is
called and hunting is
stopped
1 = Circular
(default = 0)
Issue 1.0
Level
1 2 3
2 - 349