NEC Univerge SV8100 Features And Specifications Manual page 65

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
10-03-01 ETU Setup (DLC PKG Setup) –
Terminal Type (B1)
10-03-06 ETU Setup (DLC PKG Setup) –
Terminal Type (B2)
11-06-01 ACI Extension Numbering
11-08-01 ACI Group Pilot Number
SV8100 Features and Specifications Manual
Description/Comments
Assigns or displays the current
terminal type assigned to B Channel
1 for each port on the DLC.
Assigns or displays the current
terminal type assigned to B Channel
2 for each port on the ESI.
Assign extension numbers to ACI
software ports. Select a number
outside of the normal extension
number range.
Assign pilot numbers to ACI groups.
When a user dials the pilot number,
they reach an available ACI software
port within the group.
Assigned Data
0 = Not set
1 = Multiline Terminal
2 = SLT Adapter
3 = Bluetooth Cordless
Handset
6 = PGD (Paging)
7 = PGD (Tone Ringer)
8 = PGD (Doorbox)
9 = PGD (ACI)
10 = DSS Console
11 = -- Not Used --
(default = 0)
0 = Not set
6 = PGD(2)-U( ) ADP
(Paging)
7 = PGD(2)-U( ) ADP
(Tone Ringer)
8 = PGD(2)-U( ) ADP
(Door Box)
9 = PGD(2)-U( ) ADP
(ACI)
12 = APR (B2 Mode)
(default = 0)
ACI Ports: 1~96
(default not assigned)
ACI Groups 1~16
(default not assigned)
Issue 1.0
Level
1 2 3
2 - 41