NEC Univerge SV8100 Features And Specifications Manual page 885

UNIVERGE SV8100
Program
Program Name
Number
20-13-18 Class of Service for Options
(Supplementary Service) –
Programmable Function Key
Programming (General Level)
20-13-49 Class of Service for Options
(Supplementary Service) – BLF
Indication on CO Incoming State
Operation
To change a 2-digit programmable key:
1. Press Speaker.
2. Dial 751 for 2-digit codes.
3. Press the key you want to program.
4. Enter the 2-digit key function, any additional information needed for the key and press Hold.
For available functions codes refer to Program 15-07 in the UNIVERGE SV8100 Programing Manual.
To undefine a key, enter 00.
To change a 3-digit programmable key:
1. Press Speaker.
2. Dial 752 for 3-digit codes.
3. Press the key you want to program.
4. Enter the 3-digit key function and any additional information needed for the key.
For available functions codes, refer to Program 15-07 in the UNIVERGE SV8100 Programing Manual.
To undefine a key, enter 000.
When a key is programmed using service code 752, that key cannot be programmed with a function using the 751
code until the key is undefined (000). For example with a Park Key programmed by dialing 752 + 04 must be
undefined by dialing 000 before it can be programmed as a Voice Over key by dialing 751 + 48.
To check the function of a programmable key:
1. Press the Help key.
2. Press the programmable key.
The programmed function displays.
SV8100 Features and Specifications Manual
Description/Comments
Turns Off (0) or On (1) an
extension user ability to program
General function keys using
Service Code 751 (by default).
(Refer to Program 20-07-10 for
Service Code 752.)
Turns On (1) or Off (0) the BLF
Indication on CO Incoming State.
Assigned Data
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Issue 1.0
Level
1 2 3
2 - 861