NEC Univerge SV8100 Features And Specifications Manual page 378

Issue 1.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-12-07 Service Code Setup (for Service
Access) – Step Call
11-16-01 Single Digit Service Code Setup
– Step Call
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
20-08-12 Class of Service Options
(Outgoing Call Service) –
Department Group Step Calling
2 - 354
Description/Comments
If required, customize the Step Call
service code to be used by an
extension user.
If required, use this option to
change the Department Step
Calling Single Digit Service Code.
Assign a function key Department
Step Calling (code 36).
Assign a Class of Service (1~15) to
extensions.
Turns Off or On an extension
ability to use Department Group
Step Calling.
UNIVERGE SV8100
Assigned Data
1
MLT, SLT
(default = 708)
(default = 2)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code)
(Service Code 752 by
default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
Department Step Calling
Level
2 3