NEC Univerge SV8100 Features And Specifications Manual page 439

UNIVERGE SV8100
Program
Program Name
Number
30-05-20 DSS Console Lamp Table – Hotel
Status Code
30-05-21 DSS Console Lamp Table – VM
Message Indication
30-10-01 DSS Console IP Terminal Setup –
MAC Address
Operation
Calling an extension from your DSS Console:
1. Press the DSS Console key.
If the call voice-announces, you can make it ring by dialing 1.
If you do not have Handsfree, you must lift the handset to speak.
When the DSS key is...
On
Off
Flashing Fast
Answering a trunk call from your DSS Console:
1. Press the flashing DSS Console key assigned to the trunk.
If you do not have Handsfree, you must lift the handset to speak.
Transferring a call using your DSS Console:
1. Place or answer the call.
2. Press Transfer to transfer the call.
3. Press the DSS key for the extension to receive the transfer.
4. (Optional) Announce the call.
If called party does not want the call, press the flashing line key to retrieve it.
SV8100 Features and Specifications Manual
Use to define the LED patterns for
#
(Hotel DSS) hotel status code
consoles.
Use to define the LED patterns for
VM message indications on the DSS
consoles.
Read Only program that displays the
MAC address of the IP terminal a
DSS console is associated with.
Extension Busy Lamp Field
The assigned extension is...
Description/Comments
#
on the DSS
Busy on a call
Idle
In Do Not Disturb
Assigned Data
1
0~7
[default = 5 (IL)]
0~7
[default = 3 (RW)]
00-00-00-00-00-00 ~
FF-FF-FF-FF-FF-FF
(Default =
00-00-00-00-00-00)
Issue 1.0
Level
2 3
2 - 415