NEC Univerge SV8100 Features And Specifications Manual page 827

UNIVERGE SV8100
Program
Program Name
Number
20-13-13 Class of Service Options
(Supplementary Service) –
Continued Dialing (DTMF) Signal
on ICM Call
20-15-01 Ring Cycle Setup – Normal
Incoming Call on Trunk
20-15-03 Ring Cycle Setup – Incoming
Internal Call
20-15-05 Ring Cycle Setup – DID/DDI
80-03-01 DTMF Tone Receiver Setup –
Detect Level
80-03-02 DTMF Tone Receiver Setup –
Start Delay Time
SV8100 Features and Specifications Manual
Description/Comments
Turns Off (0) or On (1) the
extension ability to use Continued
Dialing, which allows DTMF signal
sending while talking on extension.
Used to define the ring cycle for
INcoming Internal calls.
Use to define the incoming internal
call ringing cycles for each ring
type.
Used to define the ring cycle for
DID/DDI calls.
Use Items 11~32 to set the criteria
for dial tone detection for outgoing
ARS calls.
Use this option to define the start
delay time for DTMF Tone
Receiver.
Assigned Data
0 = Off
1 = On
(default = 1 for
COS 1~15)
Ringing Cycle = 1~13
(default = 3)
Ringing Cycle = 1~13
(default = 3)
Ringing Cycle = 1~13
(default = 8)
0 = 0dBm ~ -25dBm
1 = -5dBm ~ -30dBm
2 = -10dBm ~ -35dBm
3 = -15dBm ~ -40dBm
4 = -20dBm ~ -45dBm
5 = -25dBm ~ -50dBm
6 = -30dBm ~ -55dBm
default: Type 1~5 = 0
0~255
(0.25 ms ~ 64 ms)
default:
Type 1~5 = 0
Issue 1.0
Level
1 2 3
2 - 803