NEC Univerge SV8100 Features And Specifications Manual page 584

Issue 1.0
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
Central Office Calls, Answering
Central Office Calls, Placing
Microphone Cutoff
Prime Line Selection
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
15-02-08 Multiline Telephone Basic Data
Setup – Automatic Handsfree
15-02-16 Multiline Telephone Basic Data
Setup – Handsfree Operation
2 - 560
Description/Comments
Use this option to set whether
pressing a key accesses a
One-Touch Key (1) or if it
preselects the key (0).
Enable (1) or disable (0) ability of
an extension to use the
speakerphone on outside calls.
When disabled, users can hear the
conversion, but cannot respond
handsfree.
UNIVERGE SV8100
Assigned Data
1
0 = Preselect
1 = One-Touch
(Automatic Handsfree)
(default = 1)
0 = Disable
1 = Enable
(default = 1)
Handsfree and Monitor
Level
2 3